 |
 |
|
|
|
Case Study (Corporate Headquarters)
Multiplexers
| Fujitsu
Multiplexers Specification
FLM 600 ADM
|
|
Description FLM 600 ADM saves
costs by giving you the ability to use it in various configurations and
change to another configuration while in service. With the FLM 600 ADM,
you get: •Survivable SONET
architectures: •Variety of
tributary interfaces: FLM 600 ADM supports
all configurations from a single shelf and set of plug-in cards, which
saves time and money when network needs upgrading. A simple software
provisioning command allows in-service configuration changes from terminal
to UPSR or linear ADM operation. Step up to OC-48
Capacity Handling network
capacity increases is a snap with the FLM 600 ADM. When ready to upgrade
all or part of your network to OC-48, just install OC-48-based FLM 2400
ADM and reassign your existing FLM 600 ADMs as tributary shelves for the
FLM 2400 ADM. You retain your existing FLM 600 ADMs as you grow. Route Traffic Any
Way You Want It •Full STS-1 level
grooming and bandwidth management Combine Multiple
Products for the Best Solution |
|
Specification |
|||
|
| The
FLM 150 ADM is the industry leading OC-3 and OC-12 SONET Multiplexer in North
America. It supports DS1, DS3, OC-3, Ethernet, and ATM-based DS3 tributaries and
provides you extensive bandwidth management for true any-port-to-any-port
connectivity.
Local exchange carriers, competitive carriers, and independent telcos have overwhelmingly chosen FLM 150 ADM to provide proven, cost-effective solutions for their OC-3 and OC-12 transport requirements. Expandable •Survivable SONET architectures: •Variety of tributary interfaces: Direct Ethernet and cell relay support lets you provide transparent LAN service. Each FASTLANE™ -based LAN port can connect across your SONET network to another LAN or cell relay port at any FLM 150 ADM or FACTR® node. Likewise, you can interconnect any cell relay port to another cell relay port on your network. This lets you expand your service offerings and lessen your customers’ costs. With the FLM 150 ADM’s transmux card, you gain all the advantages of an integrated M13 multiplexer. For DS1 access or loop networks, you can now hand off DS3 signals at carrier points of presence without having to install external legacy M13 boxes. FLM150 ADM supports all configurations from a single shelf and set of plug-in cards, which saves time and money when your network needs upgrading. A simple software provisioning command allows in-service configuration changes from terminal to UPSR or linear ADM operation. By replacing OC-3 optics with OC-12optics, the FLM150 ADM allows connection to higher-capacity OC-12 rings with direct DS1 interfaces. All this saves equipment and installation costs as your network changes and grows. Route Traffic Any Way You Want It This allows many types of connections that will simplify your network: Combine Multiple Products for the Best Solution Specifications |
| Advanced
Features •OC-3, OC-12, and EC-1 line interfaces •Tributary hairpinning at both VT1.5 and STS-1 levels •Transmux for internal M13 multiplexing •FASTLANE data interfaces •Full PDI/PLM support •Auto facility detection and auto equipment configuration •Any-port-to-any-port TSA •In-service architecture and capacity upgrades Architectures Capacity SONET Network Interfaces Tributary Interface Maximum Quantities Protection Ratio Optics |
 |
TSA/TSI Switch Capacities •84 x 84 VT1.5 •3 x 3 STS-1 •12 x 12 STS-1 for OC-12 UPSR •VT path switching and grooming into any EC-1 or OC-3 tributary •Combinations of the above Operations Support Synchronization Power Consumption Operating Environment Physical Characteristics Specifications subject to change without notice. |
